Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: BBE6801/SYS-5017P-TLN4F
Produttore: SUPERMICRO
Descrizione: 1U Core i7-3612QE, 2x3,5" or 4x2,5" Fixed HDD, 2xSO-DIMM DDR3 ECC up to 16GB, 4xGbE (Intel 82574L), VGA port, IPMI 2.0 + KVM with LAN, Single 200W, Slot: 1xPCIe 3.0 x16
SPECIFICHE TECNICHE

5017P-TLN4F




Integrated Board
X9SPV-LN4F-3QE

Key Features
1. Embedded 3rd Gen. Intel® Core
    i7-3612QE Mobile ECC processor
    (up to 3.1GHz, 6M Cache)
2. Intel® QM77 Chipset 3. 2x 3.5" or 4x 2.5" internal SATA2 *
    Hard drive bays (optional)
4. 1x PCI-E 3.0 x16 slot** 5. Up to 16GB ECC DDR3 1066/1333MHz
    on 2x SO-DIMMs
6. Intel® 82574L; 4x GbE LAN ports 7. IPMI 2.0 on Dedicated LAN port 8. 200W Low-noise power supply w/ PFC 9. Disk-on-module (DOM) power
    connector
Available Colors: Black    

 

Product SKUs
SYS-5017P-TLN4F
  • SuperServer 5017P-TLN4F (Black)
 
Motherboard

Super X9SPV-LN4F-3QE
 
Processor/Cache
CPU
  • Embedded 3rd Gen. Intel® Core i7-3612QE Mobile ECC processor (up to 3.1GHz, 6M Cache)
 
System Memory
Memory Capacity
  • 2x 204-pin DDR3 SODIMM sockets
  • Supports up to 16 GB DDR3 ECC memory
Memory Type
  • 1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® QM77 Chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82574L Gigabit Ethernet controllers
    4x Gigabit LAN ports
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • Intel Integrated Graphics HD 4000 or Matrox G200eW to VGA via BIOS setup
 
Input / Output
SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
LAN
  • 4x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
VGA
  • 1x VGA port
Serial Port / Header
  • 2x COM ports (1 rear, 1 header)
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 9.8" (249mm)
Weight
  • Net Weight: 8 lbs (3.62 kg)
  • Gross Weight: 12 lbs (5.44 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16 slot**
 
Drive Bays
HDD
  • 2x 3.5" or 4x 2.5" internal SATA2 hard
      drive bays (optional) *
 
Power Supply
200W Low Noise AC-DC power supply with PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 2.6 Amp Max
+5V
  • 8.0 Amp (max.)
+5V standby
  • 2.0 Amp (max.)
+12V
  • 16 Amp (max.)
-12V
  • 0.5 Amp (max.)
+3.3V
  • 8.0 Amp (max.)
Certification Gold Level Certified
  Gold Certified
 
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9SPV-LN4F-3QE
CSE-504-203B
1
1
Super X9SPV-LN4F-3QE Motherboard
1U Chassis
Cable 1 CBL-0061L 2 35CM end to end, SATA CABLE, PB FREE, 26AWG, flat
Cable 2 CBL-0082L 1 Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PCI-E x16 output
Power Supply PWS-203-1H 1 1U 200W Multi-output 80Plus Gold PWS
Cable 3 CBL-0260L 1 US power cord 18AWG 6ft, PBF (default for low watt)
Cable 4 CBL-0087 1 Front Control Cable Round 16 pin to 16 pin Ribbon 20
Part MCP-120-00063-0N 1 Riser card bracket for slot-7 in SC504
 
Optional Parts List
  Part Number Qty Description
HDD Bracket MCP-220-00044-0N - Dual 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U
HDD Bracket MCP-220-00051-0N - Single 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U

* 1x 3.5" or 2x 2.5" SATA2 with riser card
** Add-on card compatibility dependent on number of drives/brackets installed + height of card components